Production process equipment for die forgings of different materials

The production process and equipment of die forgings of different materials are also different. For the production of common magnesium alloy die forgings, the first choice is the hot chamber horizontal magnesium alloy die casting die forging machine. Its advantage is that there is no complex protection system to prevent magnesium alloy combustion.

However, it is suggested to adopt a parallel heat preservation and smelting system with two furnaces. One furnace is a heat preservation furnace, the cover seal is not opened, the gas seal is added to protect it, and the other furnace is used as a special melting magnesium ingot. In order to reduce investment, the existing magnesium alloy industrial frequency furnace is recommended for melting furnace.

The second choice is cold chamber horizontal magnesium alloy die casting die forging machine. Its advantage is that it can produce super-large magnesium alloy die forgings. The melting furnace also recommends the use of existing magnesium alloy industrial frequency furnace, and the quantitative soup feeding device uses the mature equipment. The only disadvantage is that the cost of the equipment will be relatively high.

If it is the production of flame-retardant magnesium alloy die forgings, the equipment can choose all the existing ordinary extrusion die-casting die forging machine for supporting production, that is to say, the equipment for producing magnesium alloy casting forgings is exactly the same as that for producing aluminum alloy extrusion die forging machine, the equipment input is reduced by 20%, and the whole production cost can be reduced to the lowest level.

Another technological advantage of extrusion die-casting die-forging can be brought into full play in the production of flame-retardant magnesium alloy castings, which is semi-solid extrusion die-casting die-forging process of magnesium alloy. After simple flame retardant alloying, the ignition point of many ordinary magnesium alloys can be higher than 560-630 C, which makes the unprotected melting and casting-forging of magnesium alloys in the atmosphere universal, no longer limited to a few brands developed at present.

Die Forging Manufacturer, Truck Front Axle, Large Die Forging Selection Linyi Hongsen Rail Transit Material Co., Ltd.